Yueqing Ann Electric Co.,Ltd industrial products
Industrial Switch Ready to quote

Forklift Proximity Switch - IP67 Industrial Inductive Sensor

Forklift Proximity Switch‑IP67 Industrial Inductive Sensor, Non‑flush 8mm Sensing Distance, Shock‑resistant & Anti‑vibration, IP67 Oil‑Dust‑Water Resistant, CE, NPN/PNP/AC2‑wire/Relay Optional, dedicated inductive proximity sensor for forklift and material‑handling safety position detection.

Model
LM12-3002NAY-LD
Material
Nickel Plated Brass
Category
Industrial Switch
IP rating
IP67
Certification
CE

Description

Product overview

ANNELE forklift‑dedicated industrial inductive proximity switch adopts eddy‑current inductive principle for non‑contact metal target detection. Optimized for forklift harsh working conditions with heavy vibration, oil splashes and dust. Non‑flush mounting with 8 mm rated sensing distance. Reinforced housing and shock‑resistant internal structure adapt to frequent mechanical vibration of forklift lifting system, safety interlock and travel position feedback. Multiple output options match forklift control systems. Built‑in reverse‑polarity, surge and short‑circuit protection delivers stable anti‑interference performance. IP67 protection grade resists dust, oil and water splashes. Red LED indicator shows real‑time working‑status. Widely used for forklift safety interlock, fork position detection, limit trigger and metal object detection for material‑handling vehicles.

‑ Special optimized for forklift & material‑handling vehicle applications, excellent shock‑proof and anti‑vibration performance
‑ Non‑flush installation, rated sensing distance: 8 mm
‑ Multiple output options: DC3‑wire NPN / PNP (NO / NC / NO+NC), AC 2‑wire, Relay output
‑ Integrated reverse‑polarity, surge & short‑circuit protection
‑ Red LED working‑status indicator
‑ IP67 dust‑proof, oil‑proof & water‑splash‑proof rating
‑ Wide operating temperature:‑25℃ ~ +75℃
‑ CE certified, high‑strength impact‑resistant ABS resin housing
‑ Stable signal output under continuous vibration environment for forklift equipment

Profile Number LM12-3002NAY-LD  
Picture Forklift Proximity Switch - IP67 Industrial Inductive Sensor, CE/RoHS, 10-30V DC for Forklift Positioning
Mode LM12-3002NAY-LD  
Item Number   46066
Rated switching distance Sn   2 mm  
Mounting condition   Flush  
Safe operating distance   ≤(0.81×Sn)mm  
Correction factor   St37=1; Al=0.3; Stainless steel=0.7; Ms=0.4  
Repeatability   ≤2% of full scale  
Temperature drift   ≤±10%  
Hysteresis   3...15%  
Ambient temperature   -25....+70ºC  
Operating voltage   10...30 VDC  
Residual ripple   ≤10%  
Rated DC operating current   ≤200 mA  
No-load current I   ≤15 mA  
Residual current   ≤0.1 mA  
Isolation test voltage   ≤0.5 kV  
Short-circuit protection   yes/Cyclic  
Voltage drop at I   ≤1.8 V  
Wire breakage/reverse polarity protection   yes/Complete  
Output function   3-wire, contactless, NPN  
Switching frequency   2 kHz  
Design   Threaded barrel  
Dimensions   52 mm  
Housing material   Metal, CuZn, Chrome-plated  
Active area material   Plastic, PA12-GF30  
Maximum tightening torque for housing nut   10 Nm  
Electrical connection   Cable  
Vibration resistance   55 Hz (1 mm)  
Shock resistance   30 g (11 ms)  
Protection class   IP67  
Mean time between failures (MTBF)   According to SN29500 (Edition 99) at 40ºC, 2283 years
Switching status LED: red

 

Dimension drawing
Forklift Proximity Switch - IP67 Industrial Inductive Sensor, CE/RoHS, 10-30V DC for Forklift Positioning

Wiring diagram
Forklift Proximity Switch - IP67 Industrial Inductive Sensor, CE/RoHS, 10-30V DC for Forklift Positioning