Description
Product overview
G50‑series built‑in amplifier square photoelectric sensor is a direct replacement for E3JK series. It integrates signal processing circuit inside housing, supports multiple detection modes: through‑beam, retro‑reflective and diffuse‑reflective. Wide AC/DC universal power supply design, compatible with most E3JK installation dimensions and wiring logic. ABS impact‑resistant plastic housing, IP54 protection grade. Equipped with sensitivity adjustment potentiometer, Light‑ON / Dark‑ON mode selectable. Multiple output options: relay contact output, DC 3‑wire NPN / PNP, AC 2‑wire. Red LED indicator shows working status in real‑time. Widely used for object detection, counting, position monitoring on conveyor lines, packaging machinery, logistics‑automation and general‑purpose industrial equipment.
‑ Square built‑in amplifier design, direct mechanical & electrical replacement for E3JK series
‑ Three detection modes optional: Through‑beam, Retro‑reflective, Diffuse‑reflective
‑ Wide universal power supply: AC24‑240V / DC12‑240V
‑ Multiple output selections: Relay contact, DC 3‑wire NPN/PNP, AC 2‑wire
‑ Adjustable sensitivity potentiometer; Light‑ON / Dark‑ON switchable
‑ Infrared LED light source, stable anti‑interference performance
‑ ABS engineering‑plastic housing, IP54 dust‑proof and splash‑proof
‑ Red LED operation‑status indicator
‑ Pre‑wired 2‑meter standard cable
‑ Wide operating temperature:‑25℃ ~ +55℃
‑ CE certified, non‑contact detection, long service‑life
‑ Easy mounting with installation bracket for factory‑automation retrofitting
| PHOTOELECTRIC SENSOR | |||||
| Structural category | Photoelectric switch | ||||
| Outward appearance code | G50(E3JK) | ||||
| Appearance | ![]() |
||||
| Dimension | ![]() |
||||
| Diffuse type | Detection distance | 30cm 50cm | |||
| DC | NPN | NO | 3A30NA | ||
| 10 | NC | 3A30NB | |||
| ~ | NO+NC | 3A30NC | |||
| 30 | PNP | NO | 3A30PA | ||
| V | NC | 3A30PB | |||
| NO+NC | 3A30PC | ||||
| 90~ | SRC Control label silicon | NO | 2A30LA | ||
| 250 | NC | ||||
| V AC | Relay output | 2A30JC | |||
| Retroreflictive | Detection distance | 5m | |||
| NPN | NO | 3B5NA | |||
| DC | NC | 3B5NB | |||
| 10 | NO+NC | 3B5NC | |||
| ~ | PNP | NO | 3B5PA | ||
| 30 | NC | 3B5PB | |||
| V | NO+NC | 3B5PC | |||
| 90~ | SRC Control label silicon | NO | 2B5LA | ||
| 250 | NC | ||||
| V AC | Relay output | 2B5JC | |||
| DC/AC Relay output | 4B5JC | ||||
| Trough beam | Detection distance | 15m | |||
| NPN | NO | 3C15NA | |||
| DC | NC | 3C15NB | |||
| 10~ | NO+NC | 3C15NC | |||
| 30 | PNP | NO | 3C15PA | ||
| V | NC | 3C15PB | |||
| NO+NC | 3C15PC | ||||
| 90~ | SRC Control label silicon | NO | 2C15LA | ||
| 250 | NC | ||||
| V AC | Relay output | 2C15JC | |||
| DC/SCR Control output | DC:200mA , AC:300mA , relay:2A | ||||
| DC/AC Consumption current | DC:<15mA , AC:<10mA | ||||
| DC/AC Response time | DC:<2ms , AC:<20ms | ||||
| Directional angle | 3°-10° | ||||
| Detected object | transparent of opaque body | ||||
| Working environment temperature | -25ºC~55ºC | ||||
| Intensity of illumination of working environment | |||||
| Shell material | Plastic | ||||
| Protection grade | IEC standard IP54 | ||||
Wiring diagram


