Description
Product overview
12GM series ultrasonic sensor is compact cylindrical M12 threaded ultrasonic diffuse‑reflection ranging sensor. It adopts time‑of‑flight echo principle to realize non‑contact object detection and distance measurement. Not affected by object color, gloss, transparency or surface texture. Built‑in temperature compensation, teach‑in setting function, reverse‑polarity and short‑circuit protection. Compact nickel‑plated brass housing fits narrow installation space. Dual‑color LED indicates working status clearly. Multiple output versions are available. Widely used for industrial automation object detection, distance monitoring, material level control, packaging machinery and printing equipment.
‑ Compact M12 cylindrical threaded housing, ultra‑small blind zone, suitable for limited mounting space
‑ Non‑contact ultrasonic diffuse detection, immune to color, gloss and surface reflection difference
‑ Built‑in temperature compensation, reduce measuring deviation caused by ambient temperature change
‑ Support teach‑in distance setting via signal wire, easy on‑site parameter configuration
‑ Multiple output options: NPN / PNP switching output, 4‑20 mA / 0‑10 V analog, IO‑Link / RS485 Modbus‑RTU
‑ Dual‑color LED status indicator for object detection, teach‑in progress and fault alarm
‑ Nickel‑plated brass housing, IP67 protection grade, adapt to harsh industrial workshop
‑ Fast response time, high repeat accuracy
‑ Reverse‑polarity & short‑circuit protection
‑ CE certified, high‑performance solution for industrial detection & measurement
| Model | UB120-12GM-E4-V1 | UB200-12GM-E4-V1 | UB400-12GM-E4-V1 | ||
| UB120-12GM-E5-V1 | UB200-12GM-E5-V1 | UB400-12GM-E5-V1 | |||
| Detection Range | 15...120 mm | 15…200 mm | 30...400 mm | ||
| Adjustment Range | 20...120 mm | 20…200 mm | 50...400 mm | ||
| Dead Zone | 0...15 mm | 0…15 mm | 0...30 mm | ||
| Standard Target Plate | 100 mm x 100 mm | 100 mm×100 mm | 100 mm x 100 mm | ||
| Transducer Frequency | ≈ 850 KHz | ≈400 KHz | ≈310 KHz | ||
| Response Delay | ≈ 9 ms | ≈30 ms | ≈ 50 ms | ||
| LED Yellow | SSIF;TDISS | SSIF;TDISS | SSIF;TDISS | ||
| LED Red | OL: Error | OL: Error | OL: Error | ||
| RF: Target not detected in set state | RF: Target not detected in set state | RF: Target not detected in set state | |||
| Operating Voltage | 10...30VDC, Ripple 10%PP | 10...30VDC, Ripple 10%PP | 10...30VDC, Ripple 10% PP | ||
| No-load Current | ≤30mA | ≤30mA | ≤30mA | ||
| Output Type | E4 | NPN NO/NC selectable | NPN NO/NC selectable | NPN NO/NC selectable | |
| E5 | PNPNO/NC selectable | PNPNO/NC selectable | PNPNO/NC selectable | ||
| Repeatability | ≤1% | ≤1% | ≤1% | ||
| Rated Operating Current | 100mA SP/OP | 100mA SP/OP | 100mA SP/OP | ||
| Voltage Drop | ≤3V | ≤3V | ≤3V | ||
| Switching Frequency | ≤52Hz | ≤13Hz | ≤8Hz | ||
| Hysteresis Range | SD1% | SD1% | SD1% | ||
| Temperature Drift | FS ±1.5% | FS ±1.5% | FS ±1.5% | ||
| Input Type | One TI input | One TI input | One TI input | ||
| WD1: -Ug...+1V | WD1: -Ug...+1V | WD1: -Ug...+1V | |||
| WD2: 6V...+Ug | WD2: 6V...+Ug | WD2: 6V...+Ug | |||
| Zin: >4.7kΩ | Zin: >4.7kΩ | Zin: >4.7kΩ | |||
| IECACH-IN:≥1s | IECACH-IN:≥1s | IECACH-IN:≥1s | |||
| Standard | IEC/EN60947-5-2 | IEC/EN60947-5-2 | IEC/EN60947-5-2 | ||
| Ambient Temperature | -25 °C to +70 °C (248...343 K) | -25 ºC to +70ºC (248...343K) | -25 °C to +70 °C (248...343K) | ||
| Storage Temperature | -40 °C to +85 °C (233...358 K) | -40 ºC to +85ºC (233...358 K) | -40 °C to +85 °C (233...358 K) | ||
| Protection Grade | IP65 | IP65 | IP65 | ||
| Connection Method | V15 (M12x1), 5-pin | V1 (M12×1), 4-pin | V1 (M12x1), 4-pin | ||
| Housing Material | SS | SS | SS | ||
| Transducer Material | ER/HGSM; PU foam,PBT shell | ER/HGSM; PU foam,PBT shell | ER/HGSM; PU foam,PBT shell | ||
| Weight | 25 g | 25 g | 25 g | ||
| Certification | C∈ | C∈ | C∈ | ||
Dimension drawing

Wiring diagram