Item |
APB-12MRD(L) |
APB-12MTD(L) |
APB-12MGD(L) |
APB-22MRA(L) |
APB-24MRD |
APB-22MRD(L) |
APB-22MTD(L) |
APB-22MGD(L) |
|
|
Surge Immunity |
¡¡ 2kv(common mode), 1kv(differential mode), Level 3 (IEC61000-4-5) |
Electrostatic Discharge (outer casing) |
¡¡ ¡À8kv(air discharge)/¡À6kv(contact discharge), Level 3 (IEC61000-4-5) |
Ambient Temperature |
¡¡-10¡æ¡«+55¡æ |
Storage Temperature |
¡¡-40¡æ¡«+70¡æ |
Ambient Humidity |
¡¡5%¡«95%RH |
Degree of Protection |
¡¡ IP20(Non-waterproof) |
Installation |
¡¡ Fixing with M3 screws or Standard DIN rail mounting |
Dimensions (mm) |
¡¡ 71*99*90(12 points)£»126*99*90(22 points)£»126*99*90(24 points) |
Programming Language |
¡¡FBD |
Points |
¡¡ 12 points/22 points/24 points/can support 7 I/O extension modules |
Memory Capacity |
¡¡ 320 FBDs |
Filtering Duration of Input Signal |
¡¡ It can be set to improve the stability of signal |
Real-time Clock |
¡¡ 160h,can place a Li-ion battery if it is necessary |
Password Protection |
¡¡ Multiple passwords protection |
High-speed Operation |
¡¡ At most 4 high-speed inputs 10KHz, and 2 high-speed outputs 50KHz |
Analog Operation |
¡¡ At most 12 voltage 0-10V and 2 current 0/4-20mA analog inputs, and 2 analog outputs 0/4-20mA |
Power Failure Protection |
¡¡ Yes |
Simulate Monitoring |
¡¡ Yes |
Communication Interface |
¡¡ TTL interface; besides, communication module supports 2 RS485 and 1 RS232 interfaces |
Baud Rate |
¡¡9600bps |
Communication Protocol |
¡¡MODBUS RTU |
Power Supply |
Rated Voltage |
DC12-24V |
DC12-24V |
DC12-24V |
AC110-220V |
DC12-24V |
Permissible Range |
DC11-28V |
DC11-28V |
DC11-28V |
AC85V-265V |
DC11-28V |
Power Consumption |
3.5w |
|
|
|
|
Digital Input |
Input Type |
NPN/PNP |
NPN/PNP |
NPN/PNP |
NPN/PNP |
NPN/PNP |
Input Signal 0 |
DC0-5V |
DC0-5V |
DC0-5V |
AC0-70V |
DC0-5V |
Input Signal 1 |
DC8.5-28V |
DC8.5-28V |
DC8.5-28V |
AC85-265V |
DC8.5-28V |
Isolation |
Non-isolation |
Non-isolation |
Non-isolation |
Photoelectric isolation |
Non-isolation |
Isolated Group |
-- |
-- |
-- |
14 |
-- |
Isolated Voltage |
-- |
-- |
-- |
2500/5000Vr.m.s |
-- |
Digital Output |
Output Type |
Relay |
Transistor(NPN) |
Transistor(PNP) |
Relay |
Relay |
Rated Voltage |
24VDC/220VAC |
24VDC |
24VDC |
24VDC/220VAC |
24VDC/220VAC |
Isolation Method |
Relay isolation |
- |
- |
Relay isolation |
Relay isolation |
Analog Input |
Input Type |
(DC0-10V)/8 inputs |
(DC0-10V)/8 inputs |
(DC0-10V)/8 inputs |
-- |
((0)4-20mA)/2 inputs |
(DC0-10V)/12 inputs |
(DC0-10V)/12 inputs |
(DC0-10V)/12 inputs |
(DC0-10V)/12 inputs |
A/D Conversion |
12 bits |
12 bits |
12 bits |
-- |
12 bits |
Analog Output |
Output Type |
-- |
-- |
-- |
-- |
(0)4-20mA/2inputs |
A/D Conversion |
-- |
-- |
-- |
-- |
12 bits |
Isolation |
Non-isolation |
Non-isolation |
Non-isolation |
Non-isolation |
Non-isolation |
High-speed Operation |
Input Type |
4 inputs /10KHz |
4 inputs /10KHz |
4 inputs /10KHz |
-- |
4 inputs /10KHz |
Support single-phase counter and two-phase counter |
Support single-phase counter and two-phase counter |
Support single-phase counter and two-phase counter |
-- |
Support single-phase counter and two-phase counter |
Output Type |
-- |
2 outputs / 50KHZ |
2 outputs / 50KHZ |
-- |
-- |
Supports multiple outputs: PTO pulse output, PWM pulse width modulation and acceleration/ deceleration single-phase pulse |
Supports multiple outputs: PTO pulse output, PWM pulse width modulation and acceleration/ deceleration single-phase pulse |
|
|
|
|
|
|
|
|
|
|