Low-voltage Electrical
Automation Components
Request for service
Office & Factory
-
Yueqing Ann Electric Co.,Ltd
Tel: +86 577 61787199
Fax: +86 577 61787199
Add: Number 97,Zhen Bei West
Road,Qiligang Town,
YueQing,Zhengjiang,China
E-mail: ann@annelectric.com
Website: www.annelectric.com
The case scenarios
Download software
- xLogicsoft-Setup
- xLogicsoft-Setup
- eSms Config-Setup.rar
- x-Messenger- Expandable GSM/GPRS PLC
- Monitoring software supporting FAB Series PLC
- SCADA System is the System for Supervisor Control and Data Acquisition. It can collect digital and analog of the fields, carry out live or remote real-time control over the fields controlled by the FABs and provide with necessary resource management function. FAB-SCADA System Software is an easily operated, widely used industrial software for the realization of network function of the FAB Intelligent Controller. It uses FAB as the terminal control unit and it is a network system that collectively carries out the real-time data acquisition and supervisor control over the FABs that separately carry out the auto-control task. On the basis of the FAB-SCADA System Software, users can build complete supervisor management system from PCs to FABS of the control according to the specific field environments and requirements. Except the basic functions of common PLC, FAB has some special functions: real-time clock function, input and transmission of the analog, voice function, network and remote supervisor control function and so on. In this manual we will introduce how to use the network of FAB Intelligent Controllers to drive FAB-SCADA System.
- Program software of SH-300
- SH-300 is a small Human-Machine interface, mainly being used to be connected with PLC or other intelligent controllers with COM port communication function. It can monitor, setup and modify the data of the register or the status of the relay inside the PLC; thereby manipulators can monitor conveniently the PLC or the running status of the intelligent controllers with COM port communication function
- Program Software supporting SR Series PLC
- SR intelligent controller is a new type of programmable controller with FBD (Function Block Diagram) programming, which is simpler and easier to learn than the conventional PLC (ladder diagram and instruction). In the design concept of SR series products, SR-WRT is used as a programming panel to program SR series hosts. On the other hand, SR-HMI is used as a powerful simple Human-Machine Interface to display the status of SR series, and SR-HMI itself is programmable. If you want to program SR by PC, free programming software ¡°Super CAD¡± with powerful functions is provided.
- Program Software supporting FAB Series PLC
- FAB Intelligent Controller Series is a new programmable controller launched by ANN, with the programming by FBD (Function Block Diagram) , which is simpler and easier to learn than the conventional PLC (ladder diagram and instruction). In the design concept of ANN FAB series products, traditional separated controller of PLC is combined with the writer on which the program can be written directly by using the function keys on the LCD front panel in order to reduce the cost and bring convenience to users. ANN FAB is very compact and light-weighted, especially suitable for internal installation usage.
- FAB manual
- FAB Intelligent Controller Series is a new programmable controller launched by ANN, with the programming by FBD (Function Block Diagram) , which is simpler and easier to learn than the conventional PLC (ladder diagram and instruction). In the design concept of ANN FAB series products, traditional separated controller of PLC is combined with the writer on which the program can be written directly by using the function keys on the LCD front panel in order to reduce the cost and bring convenience to users. ANN FAB is very compact and light-weighted, especially suitable for internal installation usage.
- SR manual
- SR intelligent controller is a new type of programmable controller with FBD (Function Block Diagram) programming, which is simpler and easier to learn than the conventional PLC (ladder diagram and instruction). In the design concept of SR series products, SR-WRT is used as a programming panel to program SR series hosts. On the other hand, SR-HMI is used as a powerful simple Human-Machine Interface to display the status of SR series, and SR-HMI itself is programmable. If you want to program SR by PC, free programming software ¡°Super CAD¡± with powerful functions is provided.
